Siemens SIMOTICS M-1FE2, Configuration Manual, Page: 93 / 162

SIMOTICS M-1FE2 built-in motors
Configuration Manual, 05/2021, A5E50494252B AB
91
Installation
7
7.1 Safety notes
Safety measures for electromagnetic and permanent-magnetic fields
Note
Only qualified, suitably trained personnel who clearly understand the special hazards
involved may work with and on permanent-magnet rotor cores.
Note
Apply safety marking in accordance with the country-specific regulations at the assembly
stations for rotor cores.
• Observe the relevant nationally applicable health and safety regulations.
• Take measures, e.g. using shields, to reduce electromagnetic fields at their source.
• Keep the motor components in their original packaging until installation.
• Mark the storage location with the symbol for magnetic danger.
• Place the unpacked rotor core in a safe place. Secure the rotor core with non-magnetic
devices.
• Avoid contact of the rotor core with ferromagnetic bodies.
• Preferably use tools made of non-magnetic materials. Ferromagnetic assembly tools must
have low mass. Work carefully!