Siemens SIMOTICS M-1FE2, Configuration Manual

Page: 7 / 162

Introduction
SIMOTICS M-1FE2 built-in motors
Configuration Manual, 05/2021, A5E50494252B AB
5
Standard scope
The scope of the functionality described in this document can differ from the scope of the
functionality of the drive that is actually supplied.
•
Other functions not described in this documentation might be able to be executed in the
drive. However, no claim can be made regarding the availability of these functions when
the equipment is first supplied or in the event of servicing.
• The documentation can also contain descriptions of functions that are not available in a
particular product version of the drive. The functionalities of the supplied drive should
only be taken from the ordering documentation.
• Extensions or changes made by the machine manufacturer are documented by the
machine manufacturer.
For reasons of clarity, this documentation does not contain all of the detailed information on
all of the product types. This documentation cannot take into consideration every
conceivable type of installation, operation and service/maintenance.
Information regarding third-party products
Note
Recommendation relating to third-party products
This document contains recommendations relating to third-party products. Siemens accepts
the fundamental suitability of these third-party products.
You can use equivalent products from other manufacturers.
Siemens does not accept any warranty for the properties of third-party products.
Websites of third parties
This document includes hyperlinks to websites of third-party companies. Siemens is not
responsible for and shall not be liable for these websites and is not responsible for the
content or information they provide. Siemens does not control the information on these
websites and is not responsible for the content and information provided there. The user
bears the risk for their use.