Motor components
3.3 Encoder
1FE1 synchronous built-in motors
Hardware Installation Manual, 12/2016, 610.43000.40b
39
Note
•
Avoid mixing different antifreeze products.
•
Use and dose the antifreeze according to the manufacturer’s specifications.
Maintenance and service for assembled motor spindles
Check at least once annually
●
the filling level,
●
for any discoloring and
●
the cooling-water specification
Note
Use cooling water only with the permitted specification.
In case of cooling water loss, refill with a previously deployed mixture of deionized water and
inhibitor or Antifrogen N.
3.3
Encoder
The encoder is not included in the scope of delivery.
The spindle manufacturer is responsible for the selection and assembly.
Note
Additional information about the encoder is contained in the associated Configuration
Manual