Mechanical mounting
5.1 Safety instructions
1FE1 synchronous built-in motors
54
Hardware Installation Manual, 12/2016, 610.43000.40b
First aid in the case of accidents involving permanent magnets
●
Stay calm.
●
Press the emergency stop switch and, where necessary, switch off the main switch if the
machine is live.
●
Administer FIRST AID. Call for further help if required.
●
To free jammed body parts (e.g., hands, fingers, feet), pull apart components that are
clamped together.
–
To do this, use a hammer to drive a wedge into the separating rift
–
Release the jammed body parts.
●
If necessary, call for an EMERGENCY DOCTOR.
WARNING
Danger to life caused by damage to the insulation of the connection cables during mounting
Damaged insulation of the motor cables can cause an electric shock that can lead to death
or severe injuries.
•
Perform the mounting without exerting force on the connecting cables.
•
Ensure that the minimum bending radii are not exceeded.
•
Connect the connection cables with an effective strain relief.
CAUTION
Risk of injury due to touching hot surfaces
The hot surfaces associated with warm shrinking can cause injuries.
•
Do not touch any hot surfaces.
•
Wear heat-resistant gloves, safety goggles and closed work clothes.
