Siemens SIMOTICS HT Series, Operating Instructions & Installation Instructions, Page: 22 / 128

Machine design
The regulations and standards used as basis for designing and testing this machine are
stamped on the rating plate. The machine design basically complies with the subsequent
standards: Please refer to the EU Declaration of Conformity for the versions of the harmonized
standards referenced.
Table 3-1 Machine design
Feature Standard
Dimensions and operation characteristics IEC / EN 60034-1
Degree of protection IEC / EN 60034-5
Cooling IEC / EN 60034-6
Type of construction IEC / EN 60034-7
Terminal markings and direction of rotation IEC/EN 60034-8
Noise emission IEC / EN 60034-9
Mechanical vibrations IEC / EN 60034-14
IEC‑standard voltages IEC/DIN IEC 60038
Vibration limit values DIN ISO 10816-3
See also
Quality documents (Page 121)
Rating plate
The rating plate shows the identification data and the most important technical data. The data
on the rating plate and the contractual agreements define the limits of proper usage.
Description
SIMOTICS HT Series HT-direct 1FW4...1......A
22
Operating Instructions 11/2018