Siemens SIMOTICS HT Series, Operating Instructions & Installation Instructions, Page: 109 / 128

Spare parts
10
10.1 Ordering data
In addition to the exact part designation, please specify the machine type and serial number
in all orders for spare parts. Ensure that the spare part designation matches that on the spare
parts list and make sure you use the appropriate part number as well.
Example
● Bearing shield, drive end (Part 5.00)
● Machine type
● Serial number
The machine type and serial number can be found on the rating plate. The serial number is
also stamped on the end face of the shaft extension at the drive end.
Note
The graphical representations in this chapter show schematic diagrams of the basic versions.
They are used for spare parts definitions. The supplied version may differ in details from these
representations.
10.2 Ordering spare parts via the Internet
You can use "Spares on Web" to determine the order numbers for motor
spare parts quickly and easily.
.
See also
Spares on Web ( https://www.sow.siemens.com/ )
Guide for Spares on Web ( http://support.automation.siemens.com/WW/news/en/25248626 )
You can use commercially available, standard components, but ensure that they have the
same construction type, dimensions, strength class etc.
SIMOTICS HT Series HT-direct 1FW4...1......A
Operating Instructions 11/2018
109