Siemens SIMOTICCS A 1FU9, Operating Instructions Manual

Page: 31 / 126

4.5.2 Transporting certain frame sizes
Note
When lifting the machines for transport, only lift them in a position that corresponds to their
basic construction type.
4.5.3 Types of construction on the rating plate
The type of construction of the machine is stated on the rating plate.
If any transport locks are in place, remove them before commissioning. Store the transport locks
or disable them. Use the transport locks when transporting the motors again or reactivate the
transport locks.
The machines are packed in different ways depending on how they are transported and their
size. If not otherwise contractually agreed, the packaging corresponds to the packing guidelines
according to ISPM (International Standards for Phytosanitary Measures).
Comply with the graphic symbols provided on the packaging. Their meaning is as follows:
This
way up
Fragile
goods
Protect
against
moisture
Protect
against
heat
Center of
gravity
Hand hooks
forbidden
Attach
here
4.5.4 Storage
Storing outdoors
NOTICE
Damage to the motor
Damage can occur if incorrectly stored.
Take all precautions to protect the motor under extreme climatic conditions, e.g. salt-laden and/
or dusty, moist/humid atmospheres.
Choose a dry storage location which is safe from flooding and free from vibration. Repair any
damage to the packaging before putting the equipment into storage if this is necessary to ensure
proper storage conditions. In order to ensure protection against ground moisture, locate
machines, equipment and crates on pallets, wooden beams or foundations. Prevent equipment
from sinking into the ground. Do not impede air circulation under the stored items.
Preparing for use
4.5 Transport and storage
1FU9
Operating Instructions, 07/2020, A5E46712792A
29