Siemens SIMOGEAR 2KJ40, Operating Instructions Manual

Page: 9 / 148

BA 2030 (2KJ4)
Operating Instructions, 07/2020, A5E50009094A/RS-AL
7
General information and safety notes
1
1.1 General information
Note
Siemens AG does not accept any liability for damage and failures that result from the non-
observance of these operating instructions.
These operating instructions are part of the gearbox delivery. Store the operating instructions
near the gearbox. Please read the operating instructions prior to handling the gearbox and
observe the information they contain. This is how you ensure safe and disturbance-free
function.
These operating instructions apply to the standard version of SIMOGEAR gearboxes:
•
Helical gearboxes E, D and Z, sizes 19 to 189
• Parallel shaft gearboxes FD / FZ, sizes 29 to 189
• Bevel gearboxes B, K, sizes 19 to 189
• Helical worm gearboxes C, sizes 29 to 89
For the description of the precise designation see Type designation (Page 81).
Table 1- 1 Article number code
SIMOGEAR gearbox Article number position
1
2 3 4 5
Helical gearbox E 2 K J 4 0
Helical gearbox D 2 K J 4 2
Helical gearbox Z 2 K J 4 1
Parallel shaft gearbox FD 2 K J 4 4
Parallel shaft gearbox FZ 2 K J 4 3
Bevel gearbox B, K 2 K J 4 5
Helical worm gearbox C 2 K J 4 6
Note
In addition to these operating instructions, the special designed gearbox and the associated
supplementary equipment must also comply with the special contractual agreements and
technical documentation.
Please refer to the other operating instructions supplied with the product.