Introduction
Contents of the function manual
This document is part of the SIMOTION Programming - References documentation package.
This documentation serves as a supplement to the documentation on SIMODRIVE POSMO
A in the
Distributed Positioning Motor on PROFIBUS DP user manual.
This documentation is included in the SIMOTION SCOUT scope of delivery as electronic
documentation!
This manual describes how you can use function blocks to control and assign parameters for
a POSMO A drive from a SIMOTION program.
This manual describes differences in handling that arise when controlling and assigning
parameters for a POSMO A drive from the SIMOTION system as compared to the SIMATIC
system.
Function block
The function blocks for communication between the SIMOTION system and the distributed
SIMODRIVE POSMO A positioning motor are part of the program library of the "SIMOTION
SCOUT" engineering system.
SIMOTION Documentation
An overview of the SIMOTION documentation can be found in the SIMOTION Documentation
Overview document.
This documentation is included as electronic documentation in the scope of delivery of
SIMOTION SCOUT. It comprises ten documentation packages.
The following documentation packages are available for SIMOTION V4.4:
● SIMOTION Engineering System Handling
● SIMOTION System and Function Descriptions
● SIMOTION Service and Diagnostics
● SIMOTION IT
● SIMOTION Programming
● SIMOTION Programming - References
● SIMOTION C
● SIMOTION P
● SIMOTION D
● SIMOTION Supplementary Documentation
Supplement to SIMODRIVE POSMO A Positioning Motor
Function Manual, 01/2015
3
