Siemens SIMOCODE pro C, System Manual

Page: 130 / 408

Description of system components
8.3 Operator panel with display
SIMOCODE pro
130
System Manual, 05/2019, A5E40507475002A/RS-AD/004
8.3.3.12 Displaying all pending messages
This menu item provides an overview of all pending status information. A precise description
of the pending status information messages can be found in Chapter Alarms, faults, and
system events - error handling (Page 291).
8.3.3.13 Displaying all pending warnings
This menu item provides an overview of all pending warnings. In the displays settings, it is
possible to set that the display will automatically switch to this menu item when a new
general warning occurs so that the exact cause of the general warning can be displayed. A
precise description of the pending warnings can be found in Chapter Alarms, faults, and
system events - error handling (Page 291).
8.3.3.14 Displaying all pending faults
This menu item provides an overview of all pending faults. In the display settings, it is
possible to set that the display will automatically switch to this menu item when a new
general fault occurs so that the exact cause of the general fault can be displayed. A precise
description of the pending faults can be found in Chapter Alarms, faults, and system events -
error handling (Page 291).
8.3.3.15 Reading the device's internal error buffer
The "Error buffer" menu item enables access to the SIMOCODE pro's internal error buffer.
The time and cause of the last 21 faults are displayed here. See also Chapter Error buffer
(Page 288). A precise description of the faults can be found in Chapter Alarms, faults, and
system events - error handling (Page 291).