Siemens SIMOCODE pro C, System Manual

Page: 126 / 408

Description of system components
8.3 Operator panel with display
SIMOCODE pro
126
System Manual, 05/2019, A5E40507475002A/RS-AD/004
Proceed as follows to change a parameter:
● Choose menu item "Parameters" from the main menu
● Then choose the parameter to be changed in the relevant submenu
● Click OK to confirm the selection
You can now change the value with the ▲ and ▼ buttons. The longer you hold these buttons
for, the larger the step by which the value changes.
8.3.3.10 Adapt display settings
The default settings configured in the basic unit can be modified via the display settings.
However, changes made in this way do not result in a change to the configured defaults. In
addition to selecting the language and adjusting the contrast or illumination, it is also
possible to select the profiles here that are relevant for adjusting the main display. In the
factory settings menu item, the changes made to the display settings can be reset to the
values configured in the basic unit.
These are the most important menus by way of example:
Languages
English (default), German, French, Polish, Spanish, Portuguese, Italian, Finnish
or alternatively
English, Chinese, Russian, Korean.
Contrast
0 % to 100 % (default: 50 %)
Illumination
Specifies how long the backlit display will remain on on the operator panel with display after
the last keystroke and enables permanent activation or deactivation of the backlit display.
Off, 3 s, 10 s (default), 1 min, 5 min