manualshive.com logo in svg

Siemens SIMATIC WinAC Slot 412, Manual

Share
Download
Siemens SIMATIC WinAC Slot 412 Manual Download Page 5

Important Information

v

Windows Automation Center WinAC Slot 412/WinAC Slot 416 Version 3.1
A5E00065531-03

Applicability

The manual contains information that is valid at the time of the manual being
published. We reserve the right to enclose further information in the form of a
Product Information bulletin.

Additional support

Should you have any questions on using the products described in the manual to
which you cannot find answers in the manual, please get in touch with your contact
at your local Siemens agency or office.

If you have any questions or suggestions concerning this manual, please fill in the
form at the end of this manual and return it to the specified address. Please feel
free to enter your personal assessment of the manual in the form provided.

We offer a range of courses to help get you started with the SIMATIC S7
automation system. Please contact your local training center or the central training
center in Nuremberg, D-90327 Germany (tel. +49 (911) 895-3200).

Constantly updated information

You can obtain up-to-the-minute information on SIMATIC products:

On the Internet at http://www.ad.siemens.de/

By dialing the fax polling 49-8765-93 00-55 00

In addition, the SIMATIC Customer Support provides up-to-date information and
downloads for users of SIMATIC products:

On the Internet at http://www.ad.siemens.de/simatic-cs

Via the SIMATIC Customer Support mailbox at the following number: 
+49 (911) 895-7100

To access the mailbox, use a modem with up to V.34 (28.8 kbps), and set the
parameters as follows: 8, N, 1, ANSI. Alternatively, access it using ISDN 
(x.75, 64 kbps).

You can reach SIMATIC Customer Support by telephone at +49 (911) 895-7000
and by fax at +49 (911) 895-7002. Queries can also be addressed to us by Internet
mail or by mail to the mailbox specified above.

Summary of Contents for SIMATIC WinAC Slot 412































































Reviews:

No comments

Brands by name

Popular brands

Load more brands