Diagnostics
Vision Sensor VS 130
A5E00199459-01
7-5
7.2.2 Warnings/Notes
Cons.
No.
Message
Description
Possible Remedies
1
This will
delete all
codes
This warning is displayed when the
change you are planning will result
in all saved codes being deleted.
Check whether you really want to change
this parameter. If you do, all the saved codes
will be deleted and must be retrained.
2
Can only
select
trained code
You have attempted to select a
code that has not been trained.
Train the code. Afterwards, you can start the
evaluation.
3
This will
stop
processing
This message is displayed when
you change from the "RUN" menu
to the "STOP" menu.
Check whether or not you really want to
cancel the evaluation.
7.2.3 Read
Results
Cons.
No.
Message
Description
Possible Remedies
1
5HDG(55
The code could not be read in
the evaluation mode.
Note: You can modify this text in
Settings>Result>Messages
>ReadErr
For possible causes, refer to "Error Training
Code" in the error messages.
2
:URQJ'0&
1. The data matrix code
currently being read does
not correspond to the
expected data matrix code.
2. The parameter settings in
Settings>Result>Filter are
incorrect.
Note: You can modify this text in
Settings>Result>Messages
>FilterErr
1. Check whether the DMC currently being
read is correct.
2. Correct the settings in
Settings>Result>Filter.
3
0DWFK(55
The parameter selected in
Settings>Match was not found
in the data matrix code being
compared or the string defined
during training does not match
the current string of the data
matrix code.
Note: You can modify this text in
Settings>Result>Messages
>MatchErr
1. The data matrix code currently being
read is different from the trained code
(and is therefore bad) or the wrong data
matrix code was trained.
2. Check the selected parameter settings
in Settings>Match.
