Commissioning the device
4.4 Configuring the device
Comfort Panels
Operating Instructions, 03/2012, A5E03404994-02
97
4.4.4.7
Enabling sound and setting sound volume
You can activate an acoustic feedback for keyboard and touch screen operations. A sound is
emitted with each touch or activation of a key.
Requirement
The Control Panel is open.
Note
If you deactivate the settings under "Enable sounds for", no more acoustic signals will be
emitted during inadvertent operations.
Procedure
Proceed as follows:
1.
Open the "Volume & Sounds Properties" dialog with the Volume & Sounds icon.
2.
Open to the "Volume" tab.
3.
To output alarms of the HMI device with additional acoustics, select the desired option
under "Enable sounds for":
–
"Events": Warnings and system events
–
"Applications": Program-specific events
–
"Notifications": Notifications
4.
Change the volume level of the alarms using "Loud" and "Soft" if needed.
5.
To output operator feedback with additional acoustics, select the desired option under
"Enable clicks and taps for":
–
"Hardware buttons": Feedback when using keys
–
"Screen taps": Feedback when touch control
6.
Use "Loud" and "Soft" to select between loud and quiet operator feedback.
7.
Confirm your entries with "OK".
Result
The properties of the acoustic operation feedback are now set up.
See also
