Siemens SIMATIC TD 200, User Manual

Page: 14 / 132

1-4
SIMATIC TD 200 Operator Interface
C79000-G7076-C272-01
Customizing the TD 200 Keyboard
You can customize the TD 200 keyboard by designating up to 4 keys for particular
functions. The TD 200 has nine keys. Five of these keys provide predefined
context-sensitive functions, and four keys provide user-defined functions.
The keyboard has a removeable label insert (shown in Figure 1-2), so that you can
supply a custom keyboard template. Figure 1-3 shows the TD 200 keyboard label
insert dimensions.
Follow these steps to remove and insert the TD 200 label insert.
1. Remove the label insert by pulling the label insert tab out of the semi-circular
cutout with a pair of pointed tweezers. See Figure 1-2.
2. Pull the label insert over the edge of the plastic housing.
3. Customize the label insert on the reverse side, or create a custom keyboard
template following the dimension guide in Figure 1-3.
4. Insert the customized label insert by placing the corner of the insert in the
semi-circular cutout (shown in Figure 1-4). Rotate the label insert so that it is
oriented correctly.
Note
If you operate the TD 200 in a damp environment, you should select waterproof
labels, because moisture can penetrate the opening on the left of the pocket for
the labels. Small amounts of moisture or dirt do not impare the function of the
TD 200.
SIEMENS TD 200
SIEMENS TD 200
Semi-circular Cutout
Tab of Label Insert
Use tweezers to grasp tab of the label insert. Pull the label insert from the TD 200.
Figure 1-2 TD 200 Keyboard Label Insert
Product Overview and Installation