Device maintenance and repair
7.5 Installing the software
SIMATIC IPC547G
128
Operating Instructions, 04/2020, A5E49948632-AA
other operating systems
Contact the corresponding manufacturer.
7.5.3
Installing drivers and software
Requirement
You need the "Documentation and Drivers" DVD included in the scope of delivery to install
Windows drivers.
Procedure
Installing drivers
1.
If your device has no DVD drive, connect an external USB DVD drive to a USB port.
2.
Insert the supplied "Documentation and Drivers" DVD.
3.
Start the "Start" program.
4.
Accept the licensing conditions.
5.
Select "Drivers" from the index.
6.
Select the device and operating system.
7.
Select the required driver.
8.
Open the folder with the driver data. Click on the link next to "driver path".
9.
Start the setup program in this folder.
Note
The driver for the chepset must be installed first with a new Windows installation. Then
you can install the drivers of all other devices.
Installing the software
●
You can find information about installing SIMATIC software packages in the
corresponding documentation.
●
You can obtain information about driver updates and installing application programs from
the respective manufacturers.
