7 Starting up the Application
7.1 Preparation
Monitoring of 24 V load circuits
Entry-ID: 61450284, V1.1, 05/2014
45
C
o
p
y
ri
g
h
t
S
ie
m
e
n
s
A
G
2
0
1
4
A
ll
ri
g
h
ts
re
s
e
rv
e
d
7.1.2
Changing the IP address of the SIMATIC Panel
Before the project can be transferred to the SIMATIC Panel, you have to change
the IP address of the SIMATIC Panel as shown in
, via which the project
is downloaded to the CPU.
Table 7-2
No.
Action
1.
At the SIMATIC Panel, open the Control Panel.
2.
Double-click on the “Network and Dial-up Connections” icon. The available network adapter is
displayed.
3.
Open
the
“PN_X1”
entry.
The “’PN_X1’ Settings” dialog is opened.
4.
Go to the “IP Address” tab. Activate “Specify an IP address”, to specify the address manually.
Assign IP address and subnet mask according to the figure below.
Apply the settings with “OK”.
