104BWeb server
11.2 Standard web pages
S7-1200 Programmable controller
System Manual, 11/2011, A5E02486680-05
477
Logging in
No log in is required to view the data in the standard Web pages. To perform certain actions
such as changing the operating mode of the controller, or writing values to memory, you
must log in as the "admin" user.
The log in frame is near the upper left corner on each page.
To log in as the "admin" user, follow these steps:
1.
Enter "admin" for the Name field.
2.
Enter the CPU password if one is configured in the Password field; otherwise, press the
Enter key.
You are now logged in as the "admin" user.
If you encounter any errors logging in, return to the Introduction page (Page 478) and
download the Siemens security certificate (Page 490). You can then log in with no errors.
Logging out
To log out the "admin" user, simply click the "Log out" link from any
page.
You can continue to access and view standard Web pages when not logged in, but you
cannot perform the actions that are restricted to the "admin" user. Each of the standard Web
page descriptions defines the actions, if any, that require the "admin" log in.
