Communication Ports
4.3 Fiber Optic Ethernet Ports
Specifications
For specifications on the available PoE ports, refer to
4.3
Fiber Optic Ethernet Ports
Fiber optic Ethernet ports are available with either MTRJ (Mechanical Transfer
Registered Jack), LC (Lucent Connector), SC (Standard or Subscriber Connector) or ST
(Straight Tip) connectors. Make sure the Transmit (Tx) and Receive (Rx) connections
of each port are properly connected and matched to establish a proper link.
2
1
1
Tx Connector
2
Rx Connector
Figure 4.6
MTRJ Port
2
1
1
Tx Connector
2
Rx Connector
Figure 4.7
LC Port
2
1
1
Tx Connector
2
Rx Connector
Figure 4.8
SC Port
2
1
1
Tx Connector
2
Rx Connector
Figure 4.9
ST Port
For specifications on the available fiber optic Ethernet ports, refer to
Ethernet Port Specifications (Page 35)"
4.4
SFP Transceivers
The RUGGEDCOM RSG2100P supports up to two Small Form-Factor Pluggable (SFP)
transceiver sockets, which are compatible with a wide array of SFP transceivers
available from Siemens.
LEDs
Each socket features an LED that indicates its link state.
State
Description
Yellow (Solid)
Link established
RUGGEDCOM RSG2100P
Installation Manual, 04/2022, C79000-G8976-1041-20
27
