Siemens SIMATIC RF610M Function Manual Download Page 71

Page: 71 / 80

RFID Reader Interface Reference

3.4 IRfReaderApi

Mobile Readers
Function Manual, 12/2010, J31069-D0198-U001-A2-7618

3.4.27

UnsubscribeForAlarms

UnsubscribeForAlarms(alarmChannel : string) : void

Parameters

● alarmChannel

The name of an alarms channel that you want to unsubscribe

Return value(s)

None.

Exceptions

RfReaderApiException

Error while communicating with the reader service.

Check the Error member for more information.

Note

This function unregisters for asynchronous notifications of RFID alarms. Users have to either

specify the name of the alarm channel (which depends on the underlying configuration) or

use an empty string or "ALL" in order to subscribe to all available alarm.

Limitations

RF-MANAGER mode only.
If there is no configuration data available or the contained alarm channels do not match in

name, calls to UnsubscribeForAlarms will fail.

Version information

Supported in RFID Reader Interface: since V1.1

Summary of Contents for SIMATIC RF610M

















































































Search results

Summary of Contents for SIMATIC RF610M

Reviews:

Related manuals for SIMATIC RF610M

Brands by name

Popular brands

Siemens SIMATIC RF610M, Function Manual

Search results

Summary of Contents for SIMATIC RF610M

Reviews:

Related manuals for SIMATIC RF610M

Brands by name

Popular brands