Siemens SIMATIC RF610M Function Manual Download Page 66

Page: 66 / 80

RFID Reader Interface Reference

3.4 IRfReaderApi

Mobile Readers

Function Manual, 12/2010, J31069-D0198-U001-A2-7618

3.4.22

SetTrigger

SetTrigger(triggerType : RfTriggerType,

triggerState : RfTriggerState) : void

Parameters

● TriggerType

This is the selected trigger to be changed which is one of the following enumeration

values and is normally associated to a hardware key on your device.

Trigger

Description

ScanLeft

Specifies the trigger associated with the left button on the device

ScanRight

Specifies the trigger associated with the right button on the device

ScanTop

Specifies the trigger associated with the button on top of the device (directly

above the cursor keys)

ButtonScan

Specifies the trigger associated with a button within the GUI application

PistolGrip

Specifies the trigger associated with the pistol grip button on the device

Application

Specifies a virtual trigger that is only available within the software (configured

with RF-MANAGER)

● triggerState

This parameter sets the level (state) of a trigger.

Return value(s)

None.

Exceptions

RfReaderApiException

Error while communicating with the reader service.

Check the Error member for more information.

Note

This function allows setting or resetting a trigger value which in turn triggers execution of

code within the reader service (e.g. triggering an RFID source to read tags).
Being able to set the state of a trigger to ON or OFF allows arbitrary behavior of the different

keys depending on their configuration. A key may work only as long as it is pressed or as an

on/off switch.

Limitations

RF-MANAGER mode only.
Successfully activating a trigger depends on a valid configuration being available. Such a

configuration is normally set by a connected RF-MANAGER. If no valid trigger configuration

for a given trigger type exists, an error is returned.

Version information

Supported in RFID Reader Interface: since V1.1

Summary of Contents for SIMATIC RF610M

















































































Search results

Summary of Contents for SIMATIC RF610M

Reviews:

Related manuals for SIMATIC RF610M

Brands by name

Popular brands

Siemens SIMATIC RF610M, Function Manual

Search results

Summary of Contents for SIMATIC RF610M

Reviews:

Related manuals for SIMATIC RF610M

Brands by name

Popular brands