Siemens SIMATIC RF610M Function Manual Download Page 65

Page: 65 / 80

RFID Reader Interface Reference

3.4 IRfReaderApi

Mobile Readers
Function Manual, 12/2010, J31069-D0198-U001-A2-7618

3.4.21

LockIsoTag

LockIsoTag(tagID : string,

iso6BAddress : uint

iso6BTagDataLength : uint) : void

Parameters

● tagID

The ID of a tag which is to be locked, given as a plain hexadecimal encoded string.

● iso6BAddress

The ISO address is an offset at which to start the locking procedure. The ISO Standard

18000-6 specification defines this address as 1 byte in the range of 0 to 255.

● iso6BTagDataLength

The length in bytes of the ISO tag memory block that is to be locked.

Return value(s)

None.

Exceptions

RfReaderApiException

Error while communicating with the reader service.

Check the Error member for more information.

Note

Locks an ISO tag against further write-accesses.
For detailed information about the iso6BTagAddress and iso6BTagDataLength, see the ISO

Standard 18000-6 (see references section).

Limitations

This function is only valid when the protocol type is set to ISO18000-6B.

Invoking this function while another protocol is set (e.g. EPCC1GEN2) will result in an

exception.

Version information

Supported in RFID Reader Interface: since V1.0

Summary of Contents for SIMATIC RF610M

















































































Search results

Summary of Contents for SIMATIC RF610M

Reviews:

Related manuals for SIMATIC RF610M

Brands by name

Popular brands

Siemens SIMATIC RF610M, Function Manual

Search results

Summary of Contents for SIMATIC RF610M

Reviews:

Related manuals for SIMATIC RF610M

Brands by name

Popular brands