Siemens SIMATIC RF610M Function Manual Download Page 61

Page: 61 / 80

RFID Reader Interface Reference

3.4 IRfReaderApi

Mobile Readers
Function Manual, 12/2010, J31069-D0198-U001-A2-7618

3.4.19

KillTag

KillTag(tagID : string, password :string) : void

Parameters

● tagID

The ID of a tag which is to be killed, given as a plain hexadecimal encoded string.

● Password

An access password if needed. If none needed use an empty string.

A password is a hexadecimal encoded string of up to eight characters.

Return value(s)

None.

Exceptions

RfReaderApiException

Error while communicating with the reader service.

Check the Error member for more information.

Note

Kills a tag with the given ID (i.e., the tag can no longer be used).

Limitations

This function is only valid when the protocol type is set to EPCC1GEN2.

Invoking this function while another protocol is set , e.g. ISO18000-6B, will result in an

exception.

Version information

Supported in RFID Reader Interface: since V1.0

Summary of Contents for SIMATIC RF610M

















































































Search results

Summary of Contents for SIMATIC RF610M

Reviews:

Related manuals for SIMATIC RF610M

Brands by name

Popular brands

Siemens SIMATIC RF610M, Function Manual

Search results

Summary of Contents for SIMATIC RF610M

Reviews:

Related manuals for SIMATIC RF610M

Brands by name

Popular brands