RF-MANAGER RF310M software
9.3 Application mode "Mobile"
SIMATIC RF310M Mobile Reader
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
79
9.3.5.6
Read tag status
You can read and display the status data of the transponder via "Tag > Tag Status".
The following tag status information is displayed here:
●
Tag ID
●
FRAM memory size in bytes
●
Lock bit register (8-bit binary value)
●
ASIC version
Figure 9-14 Reading the tag status
9.3.5.7
Initialize the tag
The "Init Tag" function is used to overwrite the complete data area of a tag with a specific
value.
If you have activated the "Edit Tag" function in the RF-MANAGER, you can execute this
function using "Tag > Init Tag".
Prerequisite
A writable memory area is selected in the data editor:
●
The memory area of the complete tag if the "Complete" check mark is selected in the
data editor; or
●
The memory area set in the fields "Address" and "Length".
