Siemens SIMATIC RF310M Operating Instructions Manual Download Page 106

Page: 106 / 114

Appendix

A.5 Service & Support

SIMATIC RF310M Mobile Reader

106

Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618

A.5

Service & Support

Technical Support

You can access technical support for all IA/DT projects via the following:

●

Phone: + 49 (0) 911 895 7222

●

Fax: + 49 (0) 911 895 7223

●

E-mail (

mailto:[email protected]

)

●

Internet: Web form for Support Request (

http://www.siemens.com/automation/support-

request

)

Contacts

If you have any further questions on the use of our products, please contact one of our

representatives at your local Siemens office.
The addresses are found on the following pages:

●

On the Internet (

http://www.siemens.com/automation/partner

)

●

In Catalog CA 01

●

In the catalog ID 10 specially for Industrial Identification Systems

Service & support for industrial automation and drive technologies

You can find various services on the Support home page

(

http://www.siemens.com/automation/service&support

) of IA/DT on the Internet.

There you will find the following information, for example:

●

Our newsletter containing up-to-date information on your products.

●

Relevant documentation for your application, which you can access via the search

function in "Product Support".

●

A forum for global information exchange by users and specialists.

●

Your local contact for IA/DT on site.

●

Information about on-site service, repairs, and spare parts. Much more can be found

under "Our service offer".

SIMATIC documentation on the Internet

A guide to the technical documentation for the various SIMATIC products and systems is

available on the Internet:
SIMATIC Guide manuals (

http://www.siemens.com/simatic-tech-doku-portal

)

Summary of Contents for SIMATIC RF310M



















































































































Search results

Summary of Contents for SIMATIC RF310M

Reviews:

Related manuals for SIMATIC RF310M

Brands by name

Popular brands

Siemens SIMATIC RF310M, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC RF310M

Reviews:

Related manuals for SIMATIC RF310M

Brands by name

Popular brands