Siemens SIMATIC RF166C, Operating Instructions Manual

Page: 106 / 176

Programming via OPC UA
9.2 OPC UA variables
SIMATIC RF166C
106
Operating Instructions, 12/2019, C79000-G8976-C578-01
9.2.3 SimaticIdentModelVersion
Table 9- 5 SimaticIdentModelVersion
Path Root/Objects/DeviceSet/Read_point_x/RuntimeParameters/Sima
ticIdentModelVersion
Data type String
Access R
Description Indicates the version of the OPC UA module.
Possible values Example:
V1.1.0
9.2.4 CommonSettings
You can make basic settings on the communication module using these variables.
Table 9- 6 CodeTypes
Path Root/Objects/DeviceSet/Read_point_x/RuntimeParameters/Com
monSettings/CodeTypes
Data type UInt32
Access R/W
Description Definition of the data type for all AutoID identifiers in "AutoID
Standard".
The setting has an effect specifically on the data type of the
"LastScanData", variable, the "Identifier" diagnostics variable and
the "ScanData" union used for the "Identifier" in methods or
events.
The types "String", "ByteString" and "ScanDataEpc" are support-
ed. The type definition of "CodeTypes" is "MultiStateDiscrete-
Type". This means that the variable has an "Enum" that indicates
the supported data types as "Property".
Possible values
•
0: ByteString
• 1: String
•
2: ScanDataEpc