background image

Appendix 

 

17.3 Service and support 

 

SIMATIC Rack PC 840 V2  

17-4

 

Operating Instructions, Edition 05/2006, A5E00248055-04 

17.3 

17.3 

Service and support 

Additional support 

If you have any further questions relating to the products described in this documentation, 

contact your local representative at the SIEMENS office nearest you.  
Find your contact partner at: 
http://www.siemens.com/automation/partner 
A guide to the technical documentation for the various SIMATIC products and systems is 

available at: 
http://www.siemens.de/simatic-tech-doku-portal 
The online catalog and the online ordering system is available at: 
http://mall.automation.siemens.com/ 

Training center 

Siemens offers a number of training courses to familiarize you with the SIMATIC automation 

system. Please contact your regional Training Center, or the central Training Center in 

D90327 Nuremberg.  
Phone: +49 (911) 895-3200. 
Internet: http://www.sitrain.com 

Technical support 

You can reach technical support for all A&D products at: 

• 

Support request form on the web: 

http://www.siemens.de/automation/support-request 

• 

Phone: +49 180 5050 222 

• 

Fax: +49 180 5050 223 

Further information about our technical support is available in the Internet at 

www.siemens.com/automation/service 
When you contact the customer support, please have the following information for the 

technician on hand: 

• 

BIOS version 

• 

Order No. (MLFB) of the device 

• 

Installed additional software 

• 

Installed additional hardware 

Summary of Contents for SIMATIC Rack PC 840 V2



















































































































































































Reviews: