Siemens SIMATIC PCS 7 Page 28 Service Manual Download

Page: 28 / 146

Result

In BatchCC, the data from the backup file is entered into the batch database and made

available again to the plant.

3.2.4.4

How to archive a batch

Long-term archive

You archive batches in long-term archives in BatchCC. Long-term archives are used for long-

term storage of batch data in accordance with the FDA.

Rules

● Only completed batches can be archived.
● Data from long-term archives cannot be used to restore defective batch data or batch

structures.

Requirement

The archiving technology is preset in BatchCC.
● Technology "Directory":

The archive files are saved to a shared network folder. SIMATIC BATCH does not use any

specific login or password settings for access to this folder.

● Technology "SQL Server":

The archive files are saved to an SQL database. Login and password are mandatory for

this technology; a specification of the domain is not used.

● Technology "FTP Server":

The archive files are saved to an FTP Server. Login and password are mandatory for this

technology; a specification of the domain is only required if the login is assigned to a domain.

For long-term archives, you can use Process Historian.

For additional information, refer to the SIMATIC BATCH online help.

Archiving Individual Batches

You archive a single completed batch as follows:
1. Select the batches to be archived in the detail view.
2. Right-click to open the shortcut menu and select the Archive menu command.

Ensuring Availability
3.2 Data backup

Service Support and Diagnostics (V8.2)

Service Manual, 03/2016, A5E36200111-AA

Summary of Contents for SIMATIC PCS 7



















































































































































Search results

Summary of Contents for SIMATIC PCS 7

Reviews:

Related manuals for SIMATIC PCS 7

Brands by name

Popular brands

Siemens SIMATIC PCS 7, Service Manual

Search results

Summary of Contents for SIMATIC PCS 7

Reviews:

Related manuals for SIMATIC PCS 7

Brands by name

Popular brands