Siemens SIMATIC PCS 7 SMART Page 44 Getting Started Download

Page: 44 / 210

8. Click "OK" to apply all the default settings.

The "Ethernet(1)" entry is entered in the "Subnet" list and is already selected.

9. Click "OK".

Your settings are applied and the dialog box closes.

10.Click "OK".

Your settings are applied and the dialog box closes.

11.Select Station > Save and Compile.
12.Close HW Config.

5.4.2.2

Renaming the PC Station

Prerequisites

● The color_gs project is open in SIMATIC Manager.
● The component view is activated.

Procedure

1. Select the "color_gs_prj_MP\color_gs_prj_Prj\SIMATIC PC Station(1)" object in the tree

view.

2. Click Edit > Object Properties. The "Properties - SIMATIC PC Station" dialog box is

displayed.

Initial work for the project
5.4 Configuring the stations

PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)

Getting Started, 12/2017, A5E42181435-AA

Summary of Contents for SIMATIC PCS 7 SMART



















































































































































































































Search results

Summary of Contents for SIMATIC PCS 7 SMART

Reviews:

Related manuals for SIMATIC PCS 7 SMART

Brands by name

Popular brands

Siemens SIMATIC PCS 7 SMART, Getting Started

Search results

Summary of Contents for SIMATIC PCS 7 SMART

Reviews:

Related manuals for SIMATIC PCS 7 SMART

Brands by name

Popular brands