Working in runtime
10
10.1
Planning the user interface
10.1.1
Operator station in process mode
Operator control and monitoring options in process mode
In process mode, the "color_gs" project provides various options for operator control and
monitoring of the process.
With the block icons, you can perform the following:
● Observe the state of the valve: valve open or closed.
● Observe the state of the pump: pump active or inactive.
● Changing from a block icon to the associated faceplate.
● Creating the dosing quantity in the faceplate.
The block icons and associated text boxes provide you with the following options:
● Selecting the reactor.
● Selecting whether the setpoint is read from the CFC or whether the plant operator can
specify the setpoint externally.
You can also monitor the CFC and SFCs. You were already introduced to this function when
testing the charts.
10.1.2
User interface in process mode
Structure
To allow you to monitor and operate the process, a brief explanation of the user interface of
PCS 7 SMART in process mode is explained below.
PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)
Getting Started, 12/2017, A5E42181435-AA
171
