manualshive.com logo in svg

Siemens SIMATIC PCS 7 BOX, Function Manual, Page: 77 / 130

Share
Download
Siemens SIMATIC PCS 7 BOX Function Manual Download Page 77

10.Go to the "SIMATIC PC Station > CP Industrial Ethernet" folder in the hardware catalog. 

Select the "IE General" object.

11.Drag the selected CP to a free slot (such as Index 5) in the station window.
12.Click "OK".
13.Save and compile your changes.
14.Close HW Config.

Additional information

● Online help for 

HW Config

7.5.6

How to set the access point on the BOX PC

Introduction         

The following describes how to select the access point to be used to configure the PC stations.

Note
Perform the following tasks on the engineering station and the SIMATIC PCS 7 BOX PC.

Selecting an access point

Perform the following steps on all PC stations:
1. Select the menu command Start > SIMATIC > SIMATIC NET > Set PC Station.

The "'Set PC Station' Configuration Console" dialog box opens.

2. Select the "Access Points" folder in the tree view.
3. In the tree view, select the folder "PC Station > SIMATIC NET Configuration > Access 

Points".

4. Select the object "S7ONLINE" in the detail window.
5. Select the menu command Action > Properties.

The "S7ONLINE" dialog box opens.

6. In the dropdown list "Assigned interface parameter assignment", select the protocol of the 

interface to the plant bus ("IE General"):
– "ISO Ind.Ethernet -> …"
– "TCP/IP -> …"

7. Click "OK".

Commissioning and configuration of SIMATIC PCS 7 BOX RTX

7.5 Configuring SIMATIC PCS 7 BOX RTX in the PCS 7 network

BOX (V8.1)

Function Manual, 03/2015, A5E32711362-AC

77

Summary of Contents for SIMATIC PCS 7 BOX



































































































































Reviews:

No comments