Siemens SIMATIC PCS 7 BOX, Function Manual, Page: 52 / 130

3. Click "Station name" and enter the name of the PC station.
Note
This name must match the project-specific name of the PC station in the PCS 7 project.
4. Insert the missing components in the Station Configuration Editor. To do this, click "Add...".
The "Add Component" dialog box opens.
5. Select "WinCC application" as the type and set the same index (slot number) that you set
for the WinCC application in HW Config.
6. Select the (WinLC RTX) software PLC and click "Edit".
The "Edit Component" dialog box opens.
7. Click "Properties".
The "WinLC properties" dialog box opens.
– Select the entry "CP5611" in the "Available Adapters" list. Drag and drop the CP to the
index IF1.
– Click the "Confirm and restart the CPU" button. The settings are applied and the
controller are restarted.
– Click "OK".
The "WinLC properties" dialog box closes.
8. Click "OK".
The "Edit Component" dialog box closes.
9. Check the configurations in HW Config and in the Station Configuration Editor to ensure
they match. The recommended configuration is shown in section " Requirements for loading
the BOX PC (Page 46) ".
Note
Ensure that the names of the PC station match in HW Config and in the configuration in
the Station Configuration Editor of the SIMATIC PCS 7 BOX RTX.
10.Click "OK".
The Station Configuration Editor closes.
11.Select the menu command CPU > RUN.
The "Startup Type" dialog box opens.
12.Activate the "Restart" check box and click "OK".
The RUN operating mode is activated.
13.Download the PC station via NetPro.
Commissioning and configuration of SIMATIC PCS 7 BOX RTX
7.3 Configuring SIMATIC PCS 7 BOX RTX for a single-station system
BOX (V8.1)
52
Function Manual, 03/2015, A5E32711362-AC