Siemens SIMATIC Panel PC 677 Operating Instructions Manual Download Page 81

Page: 81 / 94

Appendix

A.2 Additional support

SIMATIC PC Panel PC 677/877, Control Unit
Operating Instructions, Edition 04/2005, A5E00407724-01

A-3

A.2

Additional support

Do you have additional questions regarding use of the described products, which are not

answered in the documentation? Then, contact the Siemens representative or office nearest

you.

•

Your Siemens representative:

"http://www.siemens.com/automation/partner"

•

Access to available technical documentation for individual SIMATIC products and

systems:

"http://www.siemens.de/simatic-tech-doku-portal"

•

Online catalog and online ordering system:

"http://mall.ad.siemens.com/"

Training center

To help you get started with automation technology and systems, we offer a variety of

courses. Contact your regional training center or the central training center in D-

90327 Nuremberg.

Phone: +49 (911) 895-3200.

Internet: "http://www.sitrain.com"

Technical Support

You can access technical support for all A&D projects via the following:

•

Support Request form on the web:

"http://www.siemens.de/automation/support-request"

•

Phone: + 49 180 5050 222

•

Fax: + 49 180 5050 223

Additional Technical Support information:

"http://www.siemens.com/automation/service".

Service & Support on the Internet

In addition to our documentation, our complete know-how is available online on the Internet

at:

"http://www.siemens.com/automation/service&support"

Here you will find:

•

Our newsletter containing up-to-date information on your products.

•

The documents you need via our Search function in Service & Support.

•

A forum for global information exchange by users and specialists.

•

You local Automation & Drives representative.

•

Information about on-site service, repairs, and spare parts. Much more can be found

under "Services".

Summary of Contents for SIMATIC Panel PC 677































































































Search results

Summary of Contents for SIMATIC Panel PC 677

Reviews:

Brands by name

Popular brands

Siemens SIMATIC Panel PC 677, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC Panel PC 677

Reviews:

Brands by name

Popular brands