Modules
4.4 Installing/Removing Power Modules
4.4
Installing/Removing Power Modules
The RUGGEDCOM RX1501 supports a single power module.
1
1
Power Module
Figure 4.4
Power Module
NOTICE
Contamination hazard – risk of equipment damage
Prevent the ingress of water, dirts and other debris that may lead to premature
equipment failure. Always make sure slots are not left empty.
Removing a Power Module
To remove a power module, do the following:
DANGER
Electrocution hazard – risk of serious personal injury or death
Make sure power to the module is turned off before servicing the power supply
terminal.
1. Turn off power to the module.
RUGGEDCOM RX1501
Installation Manual, 10/2021, C79000-G8976-1054-21
31
