Certification
6.1.2 CSANe
•
ANSI/UL 60079-15:20
Electrical Apparatus for Explosive Gas Atmospheres – Part 15: Type of Protection
"n"
•
ANSI/UL 60079-7:2017
Explosive atmospheres – Part 7: Equipment protection by increased safety ’’e’’
The device is marked with a CSA symbol that indicates compliance with both
Canadian and U.S. requirements.
C
US
It is specifically approved for use in Division 2 and Zone 2 hazardous locations with
the following markings:
• Class I, Division 2, Groups A, B, C, D T4
• Ex ec nC IIC T4 Gc
• Class I, Zone 2, AEx ec nC IIC T4 Gc
This device meets the requirements of the following International standards under
certificate IECEx CSA 21.0001X:
•
IEC 60079-0:2018
Explosive Atmospheres – Part 0: Equipment – General Requirements
•
IEC 60079-15:2017
Electrical Apparatus for Explosive Gas Atmospheres – Part 15: Construction, Test
and Marking of Type of Protection "n" Electrical Apparatus.
•
IEC 60079-7:2017, Edition 5.1
Explosive atmospheres – Part 7: Equipment protection by increased safety "e"
6.1.2
CSANe
When marked with the following ATEX marking, this device is approved for use in
Zone 2 hazardous locations under certificate CSANe 21ATEX3001X.
Note
For the maximum ambient temperature, refer to the hazardous location label affixed
to the device.
II 3 G
Ex ec nC IIC T4 Gc
The device also meets the requirements of the following European directive and
standards:
34
RUGGEDCOM RST916P
Installation Manual, 04/2021, C79000-G8976-1489-01
