Introduction
1.3 Required Tools and Materials
LED
State
Meaning
Blinking
Link activity
(receive)
Rx
Off
No link activity
Blinking
Link activity
(transmit)
Tx
Off
No link activity
Ethernet Port Status LEDs
Indicate the status of the associated serial port.
LED
State
Meaning
Blinking
Link activity
(receive)
RxX
Off
No link activity
Blinking
Link activity
(transmit)
Tx
Off
No link activity
Communication Ports
Receive and transmit data, as well as provide access to the
RUGGEDCOM RS400 Web interface. For more information about
the various ports available for the RUGGEDCOM RS400, refer to
.
RS-232 Console Port
The serial console port is for interfacing directly with the device
and accessing initial management functions. For information
about connecting to the device via the serial console port, refer to
"Connecting to the Device (Page 17)"
Failsafe Alarm Relay
Latches to default state when a power disruption or other alarm
condition occurs. For more information, refer to:
•
"Connecting the Failsafe Alarm Relay (Page 12)"
•
"Failsafe Alarm Relay Specifications (Page 27)"
Power Supply Terminal Block
A pluggable terminal block. For more information, refer to
1.3
Required Tools and Materials
The following tools and materials are required to install the RUGGEDCOM RS400:
Tools/Materials
Purpose
AC or DC power cord (16 AWG)
For connecting power to the device.
Multi-mode and/or single-mode fiber optic cables For connecting the device to a LAN.
CAT-5 Ethernet cables
For connecting the device to a LAN.
Flathead screwdriver
For mounting the device to a DIN rail.
Phillips screwdriver
For mounting the device to a panel.
4 x #6-32 screws
For mounting the device to a panel.
4
RUGGEDCOM RS400
Installation Manual, 01/2021, C79000-G8976-1016-11
