Siemens SIMATIC MV500 Operating Instructions Manual Download Page 217

Page: 217 / 294

Process interfacing via an automation system (PLC, PC)

9.10 Example programs

SIMATIC MV500
Operating Instructions, 03/2021, C79000-G8976-C494-05

217

Adding program change

Specify the number of the required program in memory byte MB200. The program change

runs automatically. The correct order of the commands is adhered to. The FB changes to the

program specified in the "PARAM1" parameter.

CAUTION

Avoiding undefined plant states

To avoid undefined plant states, you should only change programs when the plant is in

manual mode or is not in operation.

Startup OB OB100

In OB100, you set the RESET input of FB 79 to initialize the FB. This input is reset by the FB 79

call.

Bits of the control and status bytes used

You must edit the following control and status bytes in addition to the FB 79 call in your

program:

Table 9- 63 Control and status bytes for FB 79 call

Bit

Byte

Signal

Description

A x.6

Control byte

TRG

Processing is started with a positive edge.

A x.7

Control byte

RES

Reset sensor error

E x.0

Status byte

IN_OP

0: Error or startup

1: Sensor is functional

E x.2

Status byte

RDY

1: Sensor is in "RUN" mode, i.e. it is ready to process

codes.

You can use this signal to enable the feed of work

pieces.

9.10.2

Archiving of images and diagnostic information on a PC

You can find the program described in this section, "MMI Diagnostic Recorder", on the web

pages of Siemens Online Product Support

(

https://support.industry.siemens.com/cs/ww/en/ps/15147/ae

The MMI Diagnostic Recorder supports you with the diagnostics and maintenance of your

application. Among other things, it saves diagnostic data records as CSV files and saves all

images taken by the reader and corresponding to the set filters (e.g. "only bad reads", "match

errors" or "only successful reads") on an external PC. Please note that this function can affect

the network load if you have set a fast acquisition interval. If the image packets cannot be

sent on time, there is a buffer of up to 50 images. If this buffer is full, the corresponding

images are discarded.

Summary of Contents for SIMATIC MV500







































































































































































































































































































Search results

Summary of Contents for SIMATIC MV500

Reviews:

Siemens SIMATIC MV500, Operating Instructions Manual, Page: 217 / 294

Search results

Summary of Contents for SIMATIC MV500

Reviews: