manualshive.com logo in svg

Siemens SIMATIC MV420, Operating Instructions Manual

Share
Download
Siemens SIMATIC MV420 Operating Instructions Manual Download Page 34

Image processing 

 

4.1 Reading code (1D and 2D codes) 

 

SIMATIC MV420 / SIMATIC MV440 

32

 

Operating Instructions, 04/2013, A5E02371045-06 

Postnet 

Pharmacode 

 

  

 

  

UPC A 

UPC E 

 

  

 

  

4.1.2

 

Performance characteristics when reading codes 

4.1.2.1

 

Characteristics when reading ambitious data matrix codes and VeriCodes with "ID-

Genius" recognition 

 

 

Note 
ID-Genius not available for SIMATIC MV420 SR-B readers 
The ID-Genius recognition method is not available for SIMATIC MV420 SR-B readers. 

 

 

Note 
VeriCode support only with activated VeriCode® license 
VeriCode is only supported by readers with an activated VeriCode® license. The license can 

be activated by entering a license key in the adjustment support. 

 

Summary of Contents for SIMATIC MV420









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands