manualshive.com logo in svg

Siemens SIMATIC MP 270B, Operating Instructions Manual

Share
Download
Siemens SIMATIC MP 270B Operating Instructions Manual Download Page 143

 

Operate project 

 

9.2 Controlling graphic objects 

TP 270, OP 270, MP 270B (WinCC flexible) 
Operating Instructions, Edition 03/2004, 6AV6691-1DD01-0AB0 

9-17

 

The functions are executed by one of the following events: 

• 

Click 

• 

Press 

• 

Release 

• 

Enable 

• 

Disabling 

• 

Change 

Layout 

A button can be labeled, use a graphic symbol or be hidden.  
The operation may be followed with a visual feedback. Note that the visual feedback only 

indicates a completed operation and not whether the configured functions were actually 

executed. 

9.2.1.2 Touch 

control 

Procedure 

Touch the button on the touch screen of the HMI device.  

9.2.1.3 Keyboard 

control 

Procedure 

To operate a button with a keyboard: 

• 

Use the cursor to select the button, e.g. 

 

• 

Then press 

ENTER

 or 

. 

Summary of Contents for SIMATIC MP 270B



















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands