Siemens SIMATIC Mobile Panel 277 IWLAN Application Description Download Page 54

Page: 54 / 59

Configuration

Process

5.4

Access point configuration

Evaluating An Access Point Clients List

V1.0, Entry ID: 48946495

opyr

ight



ens

ll rig

rve

No.

Action

Screens

Text field:

if the mobile panel is connected with an
access point, a graphic is additionally
displayed next to the graphic.

Under the properties of the “Animation >
Visibility” text field the
“Panel_01_At_AccessPoi_

” variable is

used.
At a value of “

” the text field becomes

“visible”.

Note:

the “Panel_01_At_AccessPoi_

” process

variable is used for the second text field.

5.4 Access

point

configuration

Please look at chapter 4.2 “Configuring SCALANCE W788-2RR” in the
“

Configuration and Use of the Mobile Panel 277F IWLAN V2 Expansion by the

"Roaming

Functionality

" application descriptio This is where you can find a detailed description of all necessary settings for the
access point configuration.

Summary of Contents for SIMATIC Mobile Panel 277 IWLAN



























































Search results

Summary of Contents for SIMATIC Mobile Panel 277 IWLAN

Reviews:

Related manuals for SIMATIC Mobile Panel 277 IWLAN

Brands by name

Popular brands

Siemens SIMATIC Mobile Panel 277 IWLAN, Application Description

Search results

Summary of Contents for SIMATIC Mobile Panel 277 IWLAN

Reviews:

Related manuals for SIMATIC Mobile Panel 277 IWLAN

Brands by name

Popular brands