4 Functional Mechanisms of this Application
4.3
Configuration explanations
Evaluating An Access Point Clients List
V1.0, Entry ID: 48946495
27
C
opyr
ight
Si
em
ens
AG
20
1
1
A
ll rig
h
ts
re
se
rve
d
4.3
Configuration explanations
4.3.1
FB3 in connection with the DB15
For the configuration of the “FB3”, the “
DB15
” is used.
Below, the “DB15” it is explained in detail, how the individual parameters are made
up.
The “DB15” only contains the data for the first access point.
(For each access point used a data block is configured.)
Figure 4-3
Standard
values
Number of the data block with the stored MIB variable for the
first
mobile panel. In this case DB
20
Based on this value, the FB3 searches for the specified “MIB
variables” (DW#16#4944000
1
) in the DB
20
. This application is
assigned a “1” by default.
Properties of the
UDP connection.
(see settings under
NetPro)
IP address of the first access point.
The value of the IP address is specified in the “HEX format”.
Properties of the
UDP connection.
(see settings under
NetPro)
Type of the read in “MIB variable”.
In this case “4” = “Octet String”
(See the parameter description for the FB3)
The configuration of the “DB16” is performed the same way.
The “DB16” only contains the data for the second access point.
(For each access point used a data block is configured.)
