Siemens SIMATIC ITP1000 Operating Instructions Manual Download Page 61

Page: 61 / 114

Device maintenance and repair

5.4 Reinstalling the software

SIMATIC ITP1000
Operating Instructions, 05/2017, A5E37340160-AB

Select the USB stick in the Boot Manager and confirm your entry.
–

To restore a system which boots in "UEFI" mode, you must also boot the supplied

Restore USB stick using UEFI.

–

To boot the Restore USB stick in "UEFI" mode, select the corresponding entry in the

Boot Manager.

Select the function "Restore" and confirm your selection.

Follow the instructions on the screen.

Note
In delivery state, Windows 7 boots in "UEFI" mode.
In delivery state, Windows 10 boots in "UEFI" mode.

5.4.4

Updating the operating system

Windows

The latest updates for the Windows operating system are available on the Internet at

Microsoft (

http://www.microsoft.com/en-us

) and on the device in the Start menu "Start > All

Programs > Windows Update > Check for updates".

Note
Before you install new drivers or operating system updates for Windows MUI versions, set

the menus and dialogs as well as the default language to English (US), see section "Setting

up the language selection using the Multilanguage User Interface (MUI) (Page 65)".

other operating systems

Contact the corresponding manufacturer.

Summary of Contents for SIMATIC ITP1000



















































































































Search results

Summary of Contents for SIMATIC ITP1000

Reviews:

Related manuals for SIMATIC ITP1000

Brands by name

Popular brands

Siemens SIMATIC ITP1000, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC ITP1000

Reviews:

Related manuals for SIMATIC ITP1000

Brands by name

Popular brands