manualshive.com logo in svg

Siemens SIMATIC ITP1000, Operating Instructions Manual

Share
Download
Siemens SIMATIC ITP1000 Operating Instructions Manual Download Page 35

 

Commissioning the device 

 

3.3 Power supply 

SIMATIC ITP1000 
Operating Instructions, 05/2017, A5E37340160-AB 

35

 

3.3.2

 

Connecting the power supply 

The battery charges as soon as the device is connected to the power supply.  

 

 

Note 
Always operate the device with the battery inserted. 
For the proper operation of the device with external power supply, a battery must be also be 

inserted. 

 

When connecting to the power supply, note the information in the section "Charging the 

device (Page 44)". 

 

 

Note 
Power supply only with the original power supply unit 
Only use the supplied original power supply unit for the power supply of the device. This 

applies to both the connection to the device and to the connection to the docking station. 
It is used to supply power to the device in mains operation with 120 V and 230 V power 

supply networks. 
The setting of the voltage range takes place automatically. 

 

Procedure 

1.

 

Insert the supplied power supply cable into the external power supply. 

2.

 

Insert the low-voltage connector into the corresponding socket for connection to the 

power supply on the device or to the docking station. 

3.

 

Plug the external power supply into a socket with a grounded protective conductor. 

The device is operated with line current. The battery is charged during the operation. 

 

 

Note 
No mobile operation of the device when the power supply is connected 
When connected to the power supply, only operate the device on a table or in the docking 

station, refer to section "Left view (Page 15)". 

 

Summary of Contents for SIMATIC ITP1000



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands