Expanding and assigning parameters to the device
6.6 Drives
SIMATIC IPC647E
110
Operating Instructions, 11/2018, A5E45589180-AA
6.6.2
Drives in drive cage type B
6.6.2.1
Permissible expansion for temperature range 0 to 35 °C
Note
If the device is permanently installed or mounted on telescopic rails, it may only be subjected
to vibration stress during operation as described below:
The restrictions do not apply for the use of SSD.
The maximum permitted power loss of the expansion cards amounts to 75 W.
You can install the following drives in the Type B drive cage at various mounting locations.
You can find information on the mounting locations under:
●
Drive cage type B (Page 18)
Installation options
The following figure gives you an overview of the installation options for drives.
①
Drive in drive bay for internal
robust installation
②
Drive type "SATA, SATA En-
terprise" is possible
③
1 or 2 SSDs permanently in-
stalled
The maximum permitted power loss of the expansion cards is 75 W for SATA, 55 W for
SATA Enterprise SSD is not permitted.
●
10 Hz to 58 Hz:
0,0375
mm
●
58 Hz to 500 Hz: 5 m/s
2
Vibrations may not exceed 500 Hz.
Ambient temperature
0 °C - 35 °C
Drive configuration
Mode
Non-RAID system
X
RAID1 system
X
