Siemens SIMATIC IPC547D Operating Instructions Manual Download Page 9

Page: 9 / 138

SIMATIC IPC547D
Operating Instructions, 06/2011, A5E03473780-01

Overview

1.1

Product description

The SIMATIC IPC547D is a powerful industrial PC in 19" rack format design (4 HE). It is

perfectly suited for high-performance industrial PC applications.
●

Maximum performance

●

Attractive price

Applications areas

The SIMATIC IPC offers system integrators, cabinet designers, system engineers and

machine designers a 19" rack PC platform for high-performance applications and IT

applications on the control/cell level for:
●

Process and visualization applications

●

Industrial image processing

●

Quality assurance/monitoring tasks

●

Measurement, control and rule-based tasks

●

Data acquisition and management

The SIMATIC IPC has CE certification for use in the industrial sector as well as in residential

and commercial areas and small businesses. In addition to the industrial applications,

therefore, it can also be used in building automation or in public facilities.

Summary of Contents for SIMATIC IPC547D











































































































































Search results

Summary of Contents for SIMATIC IPC547D

Reviews:

Related manuals for SIMATIC IPC547D

Brands by name

Popular brands

Siemens SIMATIC IPC547D, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC547D

Reviews:

Related manuals for SIMATIC IPC547D

Brands by name

Popular brands