Siemens Simatic IPC527G Page 80 Operating Instructions Manual Download

Page: 80 / 123

Technical specifications

7.6 BIOS description

SIMATIC IPC527G

Operating Instructions, 03/2019, A5E45491226-AA

7.6.3

Advanced menu

The Advanced menu allows you to change the settings for the CPU and other system

devices.

Note
Be cautious when changing the settings of the Advanced menu. Incorrect field value can

cause the system to malfunction.

CPU Configuration

In the CPU configuration page, you can check and configure the CPU-related information

that the BIOS automatically detect.

System

parameters

Function description

Configuration

options

Default setting

Intel virtual-

ization tech-

nology

Enable or disable the intel virtualization technology.

•

[Enabled]: A VMM can utilize the additional hardware capabilities

provided by Vanderpool Technology.

•

[Disabled]: Disable this function.

•

[Enabled]

•

[Disabled]

[Enabled]

Turbo Mode Enable or disable the processor Turbo Mode.

•

[Enabled]

•

[Disabled]

[Enabled]

Summary of Contents for Simatic IPC527G




























































































































Search results

Summary of Contents for Simatic IPC527G

Reviews:

Related manuals for Simatic IPC527G

Brands by name

Popular brands

Siemens Simatic IPC527G, Operating Instructions Manual

Search results

Summary of Contents for Simatic IPC527G

Reviews:

Related manuals for Simatic IPC527G

Brands by name

Popular brands