Siemens Simatic IPC520A, Operating Instructions Manual

Page: 47 / 80

SIMATIC IPC520A
Operating Instructions, 11/2021, A5E51366325-AA
47
Technical specifications
7
7.1 Certificates and approvals
Note
Applicability
The following shows the approvals that may be available. For the device itself, it is
certificated as shown on the product label and package label.
2014/30/EU Directive of the European Parliament and of the Council of 26 February 2014 on
the harmonisation of the laws of the Member States relating to electromagnetic
compatibility; Official Journal of the EU L96, 29/03/2014, p. 79–106 (from 20.04.2016)
Low Voltage Directive:
2014/35/EU Directive of the European Parliament and of the Council of 26 February 2014 on
the harmonisation of the laws of the Member States relating to the making available on the
market of electrical equipment designed for use within certain voltage limits; Official Journal
of the EU L96, 29/03/2014, p. 357–374 (from 20.04.2016)
EMC EN 61000-6-2, EN 61000-6-4;
ISO 9001 certificate
The Siemens quality management system for all production processes (Development,
Production, Sales and Service of Automation Products, -Systems and -Solutions) meets the
requirements of ISO 9001:2015
Certificate registration no. 01 100 1430201.
Software license agreements
If the device is supplied with preinstalled software, you must observe the corresponding
license agreements.
UL approval
The following approvals are available for the device:
•
Underwriters Laboratories (UL) in accordance with Standard UL61010-1 and UL61010-2-
201, File E472609
• Canadian National Standard CAN/CSA No.61010-1-12 and CAN/CSA C22.2 No.61010-2-
201