SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 11/2016, A5E31347228-AF
133
Expanding the device and assigning device
parameters
6
6.1
Opening the device
6.1.1
Opening the built-in unit
The device must be opened in order to add memory or install the internal CFast card. Read
the information in the section "ESD guideline (Page 185)" when doing this.
Opening device with expansions
To open devices with the PCIe card and/or DVD drive expansions, you first have to
dismantle these expansions. You can find additional information on this in the following
sections:
●
Removing a PCIe card (built-in units with PCIe card without DVD drive) (Page 140)
●
Installing and removing a DVD drive (built-in unit only) (Page 142)
●
Removing a PCIe card (built-in units with PCIe card and DVD drive) (Page 142)
