Siemens SIMATIC IPC427E Operating Instructions Manual Download Page 93

Page: 93 / 164

Device maintenance and repair

7.5 Recycling and disposal

SIMATIC IPC427E
Operating Instructions, 09/2017, A5E37454814-AB

7.4.4

Update installation

7.4.4.1

Updating the operating system

Windows

The latest updates for the Windows operating system are available on the Internet at

Microsoft (

http://www.microsoft.com

) and on the device in the Start menu "Start > All

Programs > Windows Update > Check for updates".

Note
Before you install new drivers or operating system updates for Windows MUI versions,

configure the regional menu and dialog settings and the default English (US) language.

other operating systems

Contact the corresponding manufacturer.

7.4.4.2

Installing or updating application programs and drivers

Drivers for USB sticks are included in the operating system and do not have to be installed

separately.
For information about installation of SIMATIC software packages, refer to the corresponding

manufacturer documentation.
For updates of third-party drivers and application programs, contact the respective

manufacturer.

7.4.5

Backing up data

We recommend the software tool SIMATIC IPC Image & Partition Creator (as of V3.4) to

back up data under Windows. This tool provides convenient and efficient functions for

backing up and restoring the full content of memory cards, hard disks and individual

partitions (images).
The SIMATIC IPC Image & Partition Creator can be ordered using the Siemens online

ordering system (

https://mall.industry.siemens.com

). For more information about SIMATIC

IPC Image & Partition Creator, refer to its product documentation.

7.5

Recycling and disposal

The devices described in these operating instructions can be recycled thanks to their low

level of pollutants. Contact a certified disposal service company for environmentally sound

recycling and disposal of your old devices.

Summary of Contents for SIMATIC IPC427E





































































































































































Search results

Summary of Contents for SIMATIC IPC427E

Reviews:

Related manuals for SIMATIC IPC427E

Brands by name

Popular brands

Siemens SIMATIC IPC427E, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC427E

Reviews:

Related manuals for SIMATIC IPC427E

Brands by name

Popular brands