Siemens SIMATIC IPC427E Operating Instructions Manual Download Page 84

Page: 84 / 164

Device maintenance and repair

7.4 Installing the software

SIMATIC IPC427E

Operating Instructions, 09/2017, A5E37454814-AB

7.4.1.3

Windows 7 / Windows 10

Installing Windows

Note
Windows 10
Specific information on using the Windows operating systems is available in the following

manuals (not included in the scope of delivery):

•

Windows 10 - Step by Step (MS Press No. 324)

•

Windows 10 Plain and Simple (MS Press No. 422)

•

Windows 10 Inside Out (MS Press No. 325 / MS Press No. 418)

Note
Windows 7
Specific information on using the Windows operating systems is available in the following

manual (not included in the product package): Microsoft Windows 7 - Technical Reference

(MS Press No. 5927).

Requirement

●

USB keyboard and monitor

●

Supplied USB stick with Recovery function

Procedure

Note
The "USB Boot" option has to be set to "Enabled" in the BIOS menu "Boot" so that the

device can boot from the USB stick.

Connect the USB stick to the device.

Restart the device.

Press <ESC> when the following BIOS message appears:

Press Esc for Boot Options

The BIOS selection menu is displayed when initialization is completed.

To boot from the USB stick, select the Boot Manager.

Select the USB stick in the Boot Manager and confirm the entry.

Select the Recovery function and confirm the entry.

Summary of Contents for SIMATIC IPC427E





































































































































































Search results

Summary of Contents for SIMATIC IPC427E

Reviews:

Related manuals for SIMATIC IPC427E

Brands by name

Popular brands

Siemens SIMATIC IPC427E, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC427E

Reviews:

Related manuals for SIMATIC IPC427E

Brands by name

Popular brands